|
XGQD-L（T）CNC
SYSTEM |
XGQD-L（T）数控系统 |
|
This system consists of interactive-drawing
programming system,control of working,power source with
large power pulse,the main unit uses pentium 586 chip. |
本控制系统由交互式绘图编程、加工控制、大功率脉冲电 源三部分组成，主机采用奔腾586计算机。 |
|
1.Mouse drawing,parallel translation,rotate,mirror,formula
curve,list curve,gear program-package. |
1.鼠标绘图，图标提示，可直接使用块平移、旋转、对称 ，公式曲线、列表曲线和齿轮软件 |
|
2.Input way:keyboard,floppy disk,scanner,can
read.3B.files. |
2.输入方式：键盘、磁碟、可读取*.国际ISO、*.3B、 Autop、Caxa、AutoCAD-DXF文件 |
|
3.Output way:colour display,printer,floppy
disk. |
3.输出方式：彩色屏显、打印、磁盘 |
|
4.Maximum control range:9999mm |
4.最大加工控制范围：9999mm |
|
5.Taper control range:below 45 |
5.锥度控制范围：<=45 |
|
6.Automatic search for the centre of circle. |
6.自动找圆孔中心 |
|
7.Screen display working stereogragh and
automatic shadowing the machining graphic. |
7.屏幕显示加工立体图形及加工图形自动跟踪 |
|
8.Single direction processing. |
8.单向加工 |
|
9.Arbitrary pads processing. |
9.任意段加工 |
|
10.ReverSe direction processing. |
10.反向加工 |
|
11.If there is short circuit the machine
will automatically return and advance. |
11.短路自动回退与前进 |
|
12.If the wire breaks,the machine will
automatically stop. |
12.断丝自动关机床 |
|
13.If the power is off,the memory will
be proteceted. |
13.停电记忆 |
|
14.If the processing finished,the machine
will stop automatically. |
14.加工结束自动关机床，并关闭控制电源。 |
|
15.Taper is automatically reset. |
15.锥度自动复位 |
|
16.Different shape of top and bottom machining
and alter taper cutting. |
16.异形加工和变锥度加工、四轴合成 |
|
17.Automatic-jump for jumping mould. |
17.可对跳步模具进行自动跳步 |
|
18.Programming drawing can be machining
sa altering ratio. |
18.可对编程圆形改变比例加工 |
|
19.Programming and processing at same
time. |
19.可在线编程 |
|
20.One controller can transmits program
to eight single-board machines. |
20.可实现一机传送八台单板控制线切割机床 |
